1064653 GSE6-N1121

Photoelectric sensors
G6, Through-beam photoelectric sensor   Type GSE6-N1121 Part No. 1064653   At a glance   Durable metal threaded inserts   SICK ASIC technology - the result of decades of experience in photoelectric sensors   Large, user-friendly potentiometer   Large, bright indicator LEDs   IP 67 enclosure rating Your benefits   Quick and easy mounting and high durability due to threaded metal inserts   SICK ASIC technology provides high performance and excellent reliability   Easy to adjust due to large, user-friendly potentiometers   Easy to monitor due to large, bright indicator LEDs   Easy installation with SICK accessories

Features
	Sensor/detection principle:	Through-beam photoelectric sensor
	Dimensions (W x H x D):	12 mm x 31.5 mm x 21 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	0 m ... 14.5 m
	Sensing range:	0 m ... 10.6 m
	Type of light:	Infrared light
	Light source:	LED 1)
	Wave length:	850 nm

1) Average service life of 100,000 h at TA = +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	± 10 % 2)
	Power consumption:	≤ 30 mA 3)
	Output type:	NPN
	Switching mode:	Light/dark switching
	Switching mode selector:	Selectable via light/dark selector
	Output current Imax.:	≤ 100 mA 4)
	Response time:	< 500 µs 5)
	Switching frequency:	± 1,000 Hz 6)
	Connection type:	Cable, 3-wire, 2 m 7)
	Cable material:	PVC
	Conductor cross-section:	0.14 mm²
	Circuit protection:	A, B, D 8) 9) 10)
	Protection class:	III
	Weight:	170 g
	Polarisation filter:	-
	Optics material:	PMMA
	Enclosure rating:	IP 67
	Ambient operating temperature:	-25 °C ... +55 °C 11)
	Ambient storage temperature:	-40 °C ... +70 °C
	UL File No.:	NRKH.E348498 & NRKH7.E348498
	Signal voltage PNP HIGH/LOW:	VS - (≤ 3 V) / approx. 0 V
	Housing material:	ABS/PC, Plastic

1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS tolerances  3) Without load  4) At Vs > 24 V, IA max = 50 mA  5) Signal transit time with resistive load  6) With light/dark ratio 1:1  7) Do not bend below 0 °C  8) A = VS connections reverse-polarity protected  9) B = inputs and output reverse-polarity protected  10) D = outputs overcurrent and short-circuit protected  11) Temperature stability after adjustment +/-10°C